Reliable UAV GNSS Positioning: Anti-Jamming, Anti-Spoofing & Single-Station Precision
· ⏱ 10 min read · 👁 viewsShare
Core Overview
As UAV technology is rapidly adopted in agricultural spraying, power inspection, surveying and aerial photography, security monitoring, logistics delivery and other fields, flight safety has become the lifeline of industry development. Electromagnetic interference, satellite spoofing, limited endurance and restricted operating range are ever-present risks that affect stable UAV operation.
Qtalis has introduced a dedicated high-precision positioning solution for UAVs. It integrates ultra-low-power narrowband anti-jamming, multi-layer anti-spoofing and single-station precise positioning to provide UAVs with a solid and reliable “eye in the sky,” making flights safer and operations more efficient.
Part 1 | Multiple Challenges in Complex Environments
In practical operations, UAVs face four major challenges:
- Strong electromagnetic interference and frequent signal loss: Electromagnetic conditions around high-voltage corridors, communication base stations and industrial RF equipment are complex. Conventional receivers can easily lose signals or experience positioning drift, seriously affecting flight safety.
- High spoofing risk and serious safety threats: Malicious satellite spoofing can cause a UAV to deviate from its route, lose control or even crash. The risk is particularly high in security, border and energy-facility applications.
- High power consumption limits endurance and operating efficiency: Conventional high-precision positioning modules consume substantial power, shortening the duration of each sortie and reducing overall operating efficiency.
- Dependence on RTK base stations limits operating range: Conventional solutions depend on ground base stations and are constrained by distance. High-precision operations cannot be carried out in remote areas without base stations.

Figure 1. Four challenges: interference, spoofing, power consumption and lack of base stations.
Part 2 | Solution Architecture
Balancing safety and efficiency with an end-to-end high-precision positioning system
The Qtalis UAV solution focuses on safety and reliability, high efficiency with low power consumption, and availability across all operating areas. It forms a complete GNSS high-precision positioning solution with the following core components:
| Component | Model / Specification | Core Parameters |
|---|---|---|
| GNSS module | K902 / K922 |
1. Supports all-constellation, multi-frequency satellite tracking and RTK positioning and heading, with low power consumption and compact size; 2. Supports 60 dB high-performance, low-power anti-jamming to reduce interference from the environment and airframe; also supports real-time spectrum detection to identify interference bands and types; 3. Supports anti-spoofing. When deceptive signals are present, the GNSS receiver can identify them accurately and continuously output a spoofing flag, preventing the UAV from being deceived while maintaining reliable positioning; 4. Supports multiple high-precision positioning modes. Its single-station high-precision fusion positioning technology can provide continuous centimeter-level precision within one flight cycle. |
| Vantix centimeter-level NRTK service account | Qtalis Vantix |
1. Service performance: centimeter-level positioning accuracy (horizontal <3 cm, vertical <5 cm) and convergence time <5 seconds; 2. Service compatibility: compatible with WGS84, CGCS2000, ITRF2008 and other reference frames; broadcasts all-constellation, multi-frequency differential data; 3. Overall service stability: availability >99.99%; supports one million concurrent terminals; dual data centers, multi-node redundancy and automatic fault recovery; 4. Service coverage: 4,407 fully self-developed reference stations in China, providing first-tier coverage. |
Part 3 | Core Products
Proprietary chips and the Vantix cloud deliver strong performance in a compact form
1. K902 High Precision Positioning GNSS Module
K902 is a high-precision positioning module built by Qtalis around the fully proprietary QC7820 SoC. It measures 17 mm x 22 mm x 2.5 mm, weighs 1.9 g and has a typical power consumption of 0.41 W, combining compact size, low power consumption and high performance.
The module supports all-constellation, multi-frequency signal reception and multiple positioning modes. It integrates an IMU and supports integrated navigation for surveying and mapping, outdoor inspection, ground-based augmentation and other applications.
- Powerful dual-core processor: 22 nm process, dual-core processor, clock speed up to 1.2 GHz and high-performance floating-point computing;
- Ultra-low power consumption: 0.41 W typical power for longer endurance, with an SMT design for easy integration;
- Strong anti-jamming: effective suppression of narrowband and multi-tone interference, with a J/S ratio of 60 dB;
- Rich functions: supports CAN and onboard inertial navigation for expansion across multiple applications.

Figure 2. K902 high precision positioning GNSS module
2. K922 High Precision Positioning and Heading GNSS Module
K922 also uses the proprietary QC7820 SoC. It measures 16 mm x 21 mm x 2.5 mm, weighs 1.8 g and has a typical power consumption of 0.5 W. It provides high-precision positioning and heading for UAVs, precision agriculture, driver testing and training, and other applications.
The module supports all-constellation, multi-frequency signal reception and multiple positioning modes. It integrates an IMU and supports integrated navigation, with the following main advantages:
- Efficient dual-core computing: 22 nm dual-core architecture, 1.2 GHz clock speed and strong computing performance;
- Lightweight and low power: ultra-low 0.5 W power consumption, compact size and easy integration;
- 60 dB anti-jamming: suppresses multiple types of radio interference for stable operation in complex environments;
- Strong expandability: supports CAN, onboard inertial navigation and dual-antenna heading for directional operations.

Figure 3. K922 high precision positioning and heading GNSS module
3. Qtalis Vantix
Qtalis Vantix is a proprietary BeiDou space-ground integrated augmentation service platform that provides nationwide BeiDou high-precision positioning services. A total of 4,407 ground-based augmentation stations have been deployed across China, forming a high-density, highly stable and high-capacity reference-station network.
The deep integration of proprietary chips, proprietary algorithms, a self-built station network and the Vantix platform creates a four-in-one closed loop and the core advantage of cloud-chip collaboration:
- Unified equipment models: the base-station chip and the complete signal chain are developed in-house, simplifying firmware maintenance and improving consistency in network processing.
- Algorithm collaboration: models are trained using the platform’s accumulated observation data, improving terminal stability by more than 50% during active ionospheric conditions.
- Interference monitoring: receiver chips output interference-monitoring indicators such as C/N0 scores, RF AGC and spectrum information. Cloud-chip collaboration monitors interference around reference stations.
The system currently connects nearly 200,000 terminal devices across geographic information, agricultural machine autosteering, in-vehicle navigation, robotics and other industries.
Part 4 | Core Technology Highlights
Five innovations address key industry challenges
Highlight 1 Ultra-Low-Power Anti-Jamming
The proprietary Qtalis LAI anti-jamming algorithm delivers an interference suppression ratio of more than 60 dB while keeping power consumption at an exceptionally low level. Tests show that enabling anti-jamming increases total device power consumption by only 0.1 W, with almost no effect on endurance. Real-time spectrum detection accurately identifies interference bands and types so that risks can be avoided in advance.
Highlight 2 Adaptive Signal-Guided Tracking
To address electromagnetic interference from cameras, weather stations, radars, high-speed data cables and other sensors on UAV nests and aircraft, the solution introduces an adaptive signal-guidance mechanism. When one frequency is interfered with, other frequencies provide guidance and calibration, maintaining stable signals for both the nest base station and UAV, improving observation accuracy and ensuring normal RTK positioning.
Highlight 3 Multi-Layer Anti-Spoofing
A three-layer spoofing detection and protection system is used. At the lower layer, single- or dual-channel baseband tracking identifies abnormal spoofing signals. The middle layer combines PVT, RTK positioning and IMU inertial data to determine whether motion is reasonable. The upper layer interacts with the control system, issuing an alert within 2 seconds and automatically switching to pure inertial navigation or instructing the UAV to use vision navigation, guiding the aircraft to return safely or make an emergency landing.
Highlight 4 Signal Scoring
The satellite signal quality scoring algorithm evaluates C/N0, elevation angle, multipath effects and other indicators in real time. It recommends the optimal UAV-nest deployment location after comprehensive scoring, providing precise system guidance without manual trial and error and greatly reducing deployment difficulty. The UAV can dynamically display current overall signal quality, providing more precise guidance than the traditional single indicator of satellite count.
Highlight 5 Single-Station High-Precision Fusion Positioning
The single-station high-precision fusion positioning algorithm does not depend on an RTK base station. It fully integrates free public correction services with high-precision carrier-phase and other observations from K9-series modules, quickly entering fusion positioning after startup and supporting rapid takeoff. During one sortie, pure-GNSS return-to-home accuracy can be within 0.5 m, addressing precise return when vision fails at night or in remote areas without network coverage.

Figure 4. Five core technology highlights.
Part 5 | Test and Verification Data
Authoritative field testing demonstrates leading performance
1. Core Performance Indicators
| Test Item | Test Result |
|---|---|
| Interference suppression ratio | >60 dB J/S |
| Spoofing attack detection response time | <2 seconds |
| Single-station high-precision positioning accuracy | 10 cm horizontal; 20 cm vertical |
2. Interference and Spoofing Comparison Test
Test equipment: counter-UAV jammer, counter-UAV spoofing transmitter, signal spectrum analyzer and related UAV support equipment.

Figure 5. Test equipment.
| Test Item | Customer UAV (K902) | Competitor (Leading UAV Brand) |
|---|---|---|
| Interference alarm during cold start under suppression | Continuous interference alarm | Continuous interference alarm |
| Interference alarm during hot start under suppression | Continuous interference alarm | Continuous interference alarm |
| Positioning on single L1 under suppression | Position available | Position available |
| Positioning on single L2 (L5, B3) under suppression | Position available | Position available |
| Minimum height for sustained positioning while hovering under suppression | 10 m | 20 m |
| Minimum height for sustained route-flight positioning under suppression | 20 m | 35 m |
| Minimum height for sustained positioning during large maneuvers under suppression | 30 m | 50 m |
| Interference and spoofing alarms during cold start | Continuous separate interference and spoofing alarms | Continuous separate interference and spoofing alarms |
| Interference and spoofing alarms during hot start | Continuous separate interference and spoofing alarms | Continuous separate interference and spoofing alarms |
| Positioning under full-band strong spoofing | No position | No position |
| Positioning under full-band weak spoofing | Spoofing generally identified; occasional momentary deception | Easily spoofed |
| Stable spoofing identification during long-duration spoofing | Stable spoofing identification | Unstable identification; the algorithm identifies it once and then disables GNSS. The device must be restarted before reuse. |
3. Measured Single-Station High-Precision Fusion Positioning Results
The UAV can take off 30 seconds after startup and maintains stable single-station high-precision positioning throughout the flight. Satellite count remains stable, signal tracking is continuous and flight attitude is steady. Compared with the takeoff point after return, the horizontal deviation is only 0.03 m and the vertical deviation is only 0.21 m, demonstrating industry-leading single-station positioning accuracy.

Figure 6. Measured single-station high-precision fusion positioning results.
Part 6 | Typical Application Scenarios
Enabling high-quality operations across multiple industries
- Power inspection: adapts to strong power-frequency interference along high-voltage corridors; precise positioning improves inspection safety and efficient hazard detection;
- Surveying and aerial photography: provides centimeter-level positioning data, doubles mapping efficiency without ground control points and reduces operating costs;
- Security monitoring: multi-layer anti-spoofing protects flight safety in sensitive areas such as borders and industrial parks;
- Agricultural spraying: precise field route planning improves spray uniformity by more than 30%, saves chemicals and improves quality and efficiency;
- Logistics delivery: single-station high-precision fusion positioning removes base-station constraints, supports precise long-distance delivery and meets delivery requirements in remote areas.

Figure 7. Field applications in power, surveying, security, agriculture and logistics.
Part 7 | Industry Customer Cases
Recognition from leading manufacturers and large-scale deployment
Built on proprietary GNSS chips, ultra-low-power anti-jamming, multi-layer anti-spoofing and single-station high-precision fusion positioning, the Qtalis UAV high-precision positioning solution has been deeply integrated into the mainstream UAV supply chain and has achieved recognition and large-scale adoption by leading domestic aircraft manufacturers. The solution has been applied to major product lines at multiple benchmark companies, serving more than 50 UAV manufacturers with annual shipments reaching several hundred thousand units.
In addition, the Qtalis solution has been deployed in volume by more than 50 aircraft manufacturers, covering surveying and aerial photography, agricultural spraying, power inspection, logistics delivery, security monitoring and other applications. It forms a complete product portfolio and mature delivery capability from consumer to industrial systems, from short-range operations to long-endurance flight, and from ordinary environments to safety-sensitive applications. With reliable product performance, continuously evolving core technologies and responsive technical service, Qtalis supports the safe, efficient and large-scale development of the UAV industry.
📘 Recommended Reading
GNSS Integrity and RAIM: A Practical Introduction
Learn how Precise Point Positioning (PPP) achieves high-precision GNSS positioning without relying on a local base station.
Continue the Conversation
Have questions about this topic or want to share your experience? Join the Qtalis Community to discuss GNSS technologies, exchange ideas, and connect with other users and developers.
Join the Discussion