Technical Specifications
| Signal tracking | Channels: 1688 GPS: L1C/A, L2P, L1C, L2C, L5 BDS: B1I, B3I, B1C, B2a, B2b GLONASS: G1C, G1P, G2C, G2P Galileo: E1, E5b, E5a, E5AltBOC, E6 QZSS: L1C/A, L2C, L5, L1C NavIC: L5 SBAS: L1C/A, L5C PPP: B2b & HAS² |
| Cold Start | < 45s |
| Hot Start | < 15s |
| Signal reacquisition | ≤ 1s |
| RTK Initialization time | <5 s |
| Initialization Reliability | >99.99% |
| Static¹ | H: ±(2.5 mm + 0.5 ppm) V: ±(5 mm + 0.5 ppm) |
| RTK¹ | H: ±(8 mm + 1 ppm) V: ±(15 mm + 1 ppm) |
| RTD | H: ±0.25 m; V: ±0.50 m |
| SBAS | <1 m (3D RMS) |
| Smoothed standalone | H: ±1 m; V: ±1.5 m |
| Tilt measurement | ≤2 cm at tilt ≤30° (1σ) |
| Dimensions | Ø133.5 × 66 mm |
| Weight | ≤850 g |
| Display | Color display for status and mode settings |
| Keys | Power key and function key |
| Pole mount | 5/8-inch UNC female thread |
| UHF antenna | 50 Ω, TNC female connector |
| Power consumption | 1.8W³ |
| Input voltage | 5 V / 9 V ±5% DC |
| Li-ion battery capacity | 5000 mAh |
| Working time | 16 h |
| Charging: | ≤5 h; QC2.0 fast charging |
| Charging interface | USB Type-C |
| Internal storage | 4 GB |
| Working temperature | -20 °C to +65 °C |
| Storage temperature | -40 °C to +85 °C |
| Humidity | 100% non-condensing |
| Water & dust protection | IP68 |
| Drop resistance | 2 m free fall |
| Interface | USB Type-C and 7-pin LEMO |
| Cellular | Built-in 4G modem; SIM card interface |
| Network corrections | NTRIP over mobile network |
| UHF data link | Integrated transmitter and receiver Transmit power: 0.5 W / 1 W / 2 W selectable Receive sensitivity: Down to -115 dBm Air baud rate: 5 selectable levels Protocols: Transparent / TT450S / South / Mac / SNLonglink |
| Bluetooth | BT2.1+EDR / 3.0 / 4.1 / 4.2 LE |
| Wi-Fi | Web Server support |
| NFC | Supported |
| Correction data | RTCM 2.x, 3.0 and 3.2 (MSM4-MSM7) |
| Position data | NMEA-0183 (GPGGA, GPGSV, GPGSA, GPRMC, GPVTG, GPZDA) |
| Binary data | CNB (SinoGNSS proprietary) |
Note:
1. ¹ ppm is relative to baseline length. H = horizontal; V = vertical.
2. ² PPP service is optional. ³ Power consumption increases during internal UHF transmission
1. ¹ ppm is relative to baseline length. H = horizontal; V = vertical.
2. ² PPP service is optional. ³ Power consumption increases during internal UHF transmission
- Choosing a selection results in a full page refresh.
- Opens in a new window.
